When a current passes between two electrodes—one thinner than the other—it creates a wind in the air between.
If enough voltage is applied, the resulting wind can produce a thrust without the help of motors or fuel.
This phenomenon, called electro-hydro-dynamic thrust—or, more colloquially, "ionic wind"—was first identified in the 1960s.
Since then, researchers have theorised that ionic thrusters, if used as jet propulsion, would be extremely inefficient, requiring massive amounts of electricity to produce enough thrust to propel a vehicle.
Now researchers at MIT have run their own experiments and found that ionic thrusters may be a far more efficient source of propulsion than conventional jet engines.
In their experiments, they found that ionic wind produces 110 newtons of thrust per kilowatt, compared with a jet engine's 2 newtons per kilowatt.
The team has published its results in the Proceedings of the Royal Society. Steven Barrett, an assistant professor of aeronautics and astronautics at MIT, envisions that ionic wind may be used as a propulsion system for small, lightweight aircraft.
In addition to their relatively high efficiency, ionic thrusters are silent, and invisible in infrared, as they give off no heat—ideal traits, he says, for a surveillance vehicle.
"You could imagine all sorts of military or security benefits to having a silent propulsion system with no infrared signature," says Barrett, who co-authored the paper with graduate student Kento Masuyama.
Shooting the gap A basic ionic thruster consists of three parts: a very thin copper electrode, called an emitter; a thicker tube of aluminum, known as a collector; and the air gap in between.
A lightweight frame typically supports the wires, which connect to an electrical power source. As voltage is applied, the field gradient strips away electrons from nearby air molecules.
These newly ionized molecules are strongly repelled by the corona wire, and strongly attracted to the collector.
As this cloud of ions moves toward the collector, it collides with surrounding neutral air molecules, pushing them along and creating a wind, or thrust.
To measure an ion thruster's efficiency, Barrett and Masuyama built a similarly simple setup, and hung the contraption under a suspended digital scale.
They applied tens of thousands of volts, creating enough current draw to power an incandescent light bulb.
They altered the distance between the electrodes, and recorded the thrust as the device lifted off the ground. Barrett says that the device was most efficient at producing lower thrust—a desirable, albeit counter-intuitive, result.
"It's kind of surprising, but if you have a high-velocity jet, you leave in your wake a load of wasted kinetic energy," Barrett explains.
"So you want as low-velocity a jet as you can, while still producing enough thrust." He adds that an ionic wind is a good way to produce a low-velocity jet over a large area.
If enough voltage is applied, the resulting wind can produce a thrust without the help of motors or fuel.
This phenomenon, called electro-hydro-dynamic thrust—or, more colloquially, "ionic wind"—was first identified in the 1960s.
Since then, researchers have theorised that ionic thrusters, if used as jet propulsion, would be extremely inefficient, requiring massive amounts of electricity to produce enough thrust to propel a vehicle.
Now researchers at MIT have run their own experiments and found that ionic thrusters may be a far more efficient source of propulsion than conventional jet engines.
In their experiments, they found that ionic wind produces 110 newtons of thrust per kilowatt, compared with a jet engine's 2 newtons per kilowatt.
Steven Barrett |
In addition to their relatively high efficiency, ionic thrusters are silent, and invisible in infrared, as they give off no heat—ideal traits, he says, for a surveillance vehicle.
"You could imagine all sorts of military or security benefits to having a silent propulsion system with no infrared signature," says Barrett, who co-authored the paper with graduate student Kento Masuyama.
Shooting the gap A basic ionic thruster consists of three parts: a very thin copper electrode, called an emitter; a thicker tube of aluminum, known as a collector; and the air gap in between.
Kento Masuyama |
These newly ionized molecules are strongly repelled by the corona wire, and strongly attracted to the collector.
As this cloud of ions moves toward the collector, it collides with surrounding neutral air molecules, pushing them along and creating a wind, or thrust.
To measure an ion thruster's efficiency, Barrett and Masuyama built a similarly simple setup, and hung the contraption under a suspended digital scale.
They applied tens of thousands of volts, creating enough current draw to power an incandescent light bulb.
They altered the distance between the electrodes, and recorded the thrust as the device lifted off the ground. Barrett says that the device was most efficient at producing lower thrust—a desirable, albeit counter-intuitive, result.
"It's kind of surprising, but if you have a high-velocity jet, you leave in your wake a load of wasted kinetic energy," Barrett explains.
"So you want as low-velocity a jet as you can, while still producing enough thrust." He adds that an ionic wind is a good way to produce a low-velocity jet over a large area.
No comments:
Post a Comment