ESA's Cluster satellites have discovered that cosmic particle accelerators are more efficient than previously thought.
The discovery has revealed the initial stages of acceleration for the first time, a process that could apply across the Universe.
All particle accelerators need some way to begin the acceleration process. For example, the Large Hadron Collider (LHC) at CERN employs a series of small accelerators to get its particles up to speed before injecting them into the main 27 km-circumference ring for further acceleration.
In space, large magnetic fields guide particles known as cosmic rays across the Universe at almost the speed of light, but are notoriously bad at getting them moving in the first place.
Now ESA's Cluster mission has shown that something similar to the 'staging' process used at CERN is happening above our heads in the natural particle accelerators of space.
On 9 January 2005, Cluster's four satellites passed through a magnetic shock high above Earth. The spinning craft were aligned almost perfectly with the magnetic field, allowing them to sample what was happening to electrons on very short timescales of 250 milliseconds or less.
The measurements showed that the electrons rose sharply in temperature, which established conditions favourable to larger scale acceleration.
It had long been suspected that shocks could do this, but the size of the shock layers and the details of the process had been difficult to pin down.
Steven J. Schwartz, Imperial College London, and colleagues used the Cluster data to estimate the thickness of the shock layer. This is important because the thinner a shock is, the more easily it can accelerate particles.
"With these observations, we found that the shock layer is about as thin as it can possibly be," says Dr Schwartz.
Thin in this case corresponds to about 17 km. Previous estimates had only been able to tie down the width of the shock layers above Earth at no more than 100 km.
This is the first time anyone has seen such details of the initial acceleration region.
The discovery has revealed the initial stages of acceleration for the first time, a process that could apply across the Universe.
All particle accelerators need some way to begin the acceleration process. For example, the Large Hadron Collider (LHC) at CERN employs a series of small accelerators to get its particles up to speed before injecting them into the main 27 km-circumference ring for further acceleration.
In space, large magnetic fields guide particles known as cosmic rays across the Universe at almost the speed of light, but are notoriously bad at getting them moving in the first place.
Now ESA's Cluster mission has shown that something similar to the 'staging' process used at CERN is happening above our heads in the natural particle accelerators of space.
On 9 January 2005, Cluster's four satellites passed through a magnetic shock high above Earth. The spinning craft were aligned almost perfectly with the magnetic field, allowing them to sample what was happening to electrons on very short timescales of 250 milliseconds or less.
The measurements showed that the electrons rose sharply in temperature, which established conditions favourable to larger scale acceleration.
It had long been suspected that shocks could do this, but the size of the shock layers and the details of the process had been difficult to pin down.
Steven J. Schwartz, Imperial College London, and colleagues used the Cluster data to estimate the thickness of the shock layer. This is important because the thinner a shock is, the more easily it can accelerate particles.
"With these observations, we found that the shock layer is about as thin as it can possibly be," says Dr Schwartz.
Thin in this case corresponds to about 17 km. Previous estimates had only been able to tie down the width of the shock layers above Earth at no more than 100 km.
This is the first time anyone has seen such details of the initial acceleration region.
No comments:
Post a Comment