Showing posts with label multipurpose crew vehicle. Show all posts
Showing posts with label multipurpose crew vehicle. Show all posts

Wednesday, November 13, 2013

NASA ORION Spacecraft on track for 2017

The first flight shell of NASA's new Orion spacecraft is presented to invited guests and the media inside the Operations and Checkout building at Kennedy Space Center, Florida on July 2, 2012

The first test mission of a new deep space capsule that could one day take humans to Mars is on track for September 2014, the US space agency said Tuesday.

Orion aims to replace US capacity to reach space—which ended with the retirement of the space shuttle program closed in 2011 after 30 years—and ferry astronauts farther in the solar system than ever before.

Bill Gerstenmaier, NASA associate administrator for human exploration and operations, said the project has made "tremendous progress."

NASA has described Orion as "a flexible system that can to launch crew and cargo missions, extend human presence beyond low-Earth orbit, and enable new missions of exploration throughout our solar system."

Orion will not carry humans on board until 2021 at the earliest.

Its four-hour test flight next year will launch from Cape Canaveral in Florida.

After that, the unmanned craft is to make two orbits around the Earth, traveling at a distance of 3,600 miles (5,800 kilometers) above Earth's surface, and then plunge back into Earth's atmosphere at high speed.

The test tour will take it 15 times farther than the International Space Station's orbit around the globe.

Bill Gerstenmaier speaks at the Kennedy Space Center on July 31, 2009 in Cape Canaveral, Florida

The flight aims to test the vehicle's thermal heat shield as it plunges through temperatures of 4,000 Fahrenheit (2,200 Celsius), and see how well the nearly nine-ton spacecraft splashes down in the Pacific Ocean off California.

However, the Delta IV heavy rocket that will launch the spacecraft is not yet ready.

Gerstenmaier said the space launch system (SLS) is 70 percent complete and again cited "tremendous progress" on the project.

Orion's next space mission—a spin around the Moon—is set for 2017.

Sunday, November 10, 2013

NASA Orion multipurpose crew vehicle: Triple Fairings Jettison Test completed successfully

The three panels or fairings encapsulating a stand-in for Orion’s service module successfully detach and fall into the Fairing Catch System during a test Nov. 6, 2013 at Lockheed Martin’s facility in Sunnyvale, Calif.

Image Credit: Lockheed Martin

The three panels or fairing that moments before encapsulated a stand-in for Orion’s service module lay safely in the Fairing Catch System after a test demonstrating their detachment system on Nov. 6, 2013, at Lockheed Martin’s facility in Sunnyvale, Calif.

Image Credit: Lockheed Martin

The three massive panels protecting a test version of NASA's Orion multipurpose crew vehicle successfully fell away from the spacecraft Wednesday in a test of a system that will protect Orion during its first trip to space next year.

The panels, called fairings, encase Orion's service module and shield it from the heat, wind and acoustics it will experience during the spacecraft's climb into space.

The service module, located directly below the crew capsule, will contain the in-space propulsion capability for orbital transfer, attitude control and high-altitude ascent aborts when Orion begins carrying humans in 2021.

It also will generate and store power and provide thermal control, water and air for the astronauts. The service module will remain connected to the crew module until just before the capsule returns to Earth.

Artist's rendering of NASA Orion during Exploration Flight Test (EFT-1)

During Orion's Exploration Flight Test-1 (EFT-1), the spacecraft's flight test next year, a test service module will be attached to the capsule.

"Hardware separation events like this are absolutely critical to the mission and some of the more complicated things we do," said Mark Geyer, Orion program manager at NASA's Johnson Space Center in Houston.

"We want to know we've got the design exactly right and that it can be counted on in space before we ever launch."

Unlike conventional rocket fairings, these panels are designed to support half of the weight of Orion's crew module and launch abort system during launch and ascent, which improves performance, saves weight and maximizes the size and capability of the spacecraft.

Each panel is 14 feet high and 13 feet wide. The fairings' work is done soon after launch. They must be jettisoned when Orion has reached an altitude of about 560,000 feet.

To make that possible, six breakable joints and six explosive separation bolts are used to connect the fairing panels to the rocket and each other.

In a carefully timed sequence, the joints are fired apart, followed shortly by the bolts. Once all of the pyrotechnics have detonated, six spring assemblies will push the three panels away, leaving the service and crew module exposed to space as they travel onward.