Showing posts with label Guide. Show all posts
Showing posts with label Guide. Show all posts

Tuesday, August 5, 2014

ALMA pinpoints Pluto to help guide NASA's New Horizons spacecraft

The cold surface of Pluto and its largest moon Charon as seen with ALMA on July 15, 2014. 

Credit: NRAO/AUI/NSF

Astronomers using the Atacama Large Millimeter/submillimeter Array (ALMA) are making high-precision measurements of Pluto's location and orbit around the Sun to help NASA's New Horizons spacecraft accurately home in on its target when it nears Pluto and its five known moons in July 2015.

Though observed for decades with ever-larger optical telescopes on Earth and in space, astronomers are still working out Pluto's exact position and path around our Solar System.

ALMA - The Atacama Array

This lingering uncertainty is due to Pluto's extreme distance from the Sun (approximately 40 times farther out than the Earth) and the fact that we have been studying it for only about one-third of its orbit.

Pluto was discovered in 1930 and takes 248 years to complete one revolution around the Sun.

"With these limited observational data, our knowledge of Pluto's position could be wrong by several thousand kilometers, which compromises our ability to calculate efficient targeting maneuvers for the New Horizons spacecraft," said New Horizons Project Scientist Hal Weaver, from the Johns Hopkins University Applied Physics Laboratory in Laurel, Maryland.

NASA's New Horizons spacecraft
The New Horizons team made use of the ALMA positioning data, together with newly analyzed visible light measurements stretching back to Pluto's discovery, to determine how to perform the first such scheduled course correction for targeting, known as a Trajectory Correction Maneuver (TCM), in July.

This maneuver helped ensure that New Horizons uses the minimum fuel to reach Pluto, saving as much as possible for a potential extended mission to explore Kuiper Belt objects after the Pluto system flyby is complete.

Animated image of ALMA data showing the motion of the moon Charon around the icy dwarf planet Pluto. 

Credit: B. Saxton (NRAO/AUI/NSF)

To prepare for this first TCM, astronomers needed to pinpoint Pluto's position using the most distant and most stable reference points possible.

Finding such a reference point to accurately calculate trajectories of such small objects at such vast distances is incredibly challenging.

Normally, stars at great distances are used by optical telescopes for astrometry (the positioning of things on the sky) since they change position only slightly over many years.

For New Horizons, however, even more precise measurements were necessary to ensure its encounter with Pluto would be as on-target as possible.

The most distant and most apparently stable objects in the Universe are quasars, galaxies more than 10 billion light-years away.

Though quasars appear very dim to optical telescopes, they are incredibly bright at radio wavelengths, particularly the millimeter wavelengths that ALMA can see.

Ed Fomalont
"The ALMA astrometry used a bright quasar named J1911-2006 with the goal to cut in half the uncertainty of Pluto's position," said Ed Fomalont, an astronomer with the National Radio Astronomy Observatory in Charlottesville, Virginia, and currently assigned to ALMA's Operations Support Facility in Chile.

ALMA was able to study Pluto and its largest moon Charon by picking up the radio emission from their cold surfaces, which are about 43 degrees Kelvin (-230 degrees Celsius).

The team first observed these two icy worlds in November 2013, and then three more times in 2014, once in April and twice in July. Additional observations are scheduled for October 2014.

"By taking multiple observations at different dates, we allow Earth to move along its orbit, offering different vantage points in relation to the Sun," said Fomalont.

"Astronomers can then better determine Pluto's distance and orbit." This astronomical technique is called measuring Pluto's parallax.

"We are very excited about the state-of-the-art capabilities that ALMA brings to bear to help us better target our historic exploration of the Pluto system," said New Horizons Principal Investigator Alan Stern of the Southwest Research Institute in Boulder, Colorado.

"We thank the entire ALMA team for their support and for the beautiful data they are gathering for New Horizons."

Tuesday, December 17, 2013

NASA Dawn creates guide to Vesta's hidden attractions

This colorful composite image from NASA's Dawn mission shows the flow of material inside and outside a crater called Aelia on the giant asteroid Vesta. 

The area is around 14 degrees south latitude. 

The images that went into this composite were obtained by Dawn's framing camera from September to October 2011.

Credit: NASA /JPL-Caltech /UCLAMPS /DLR /IDA

Some beauty is revealed only at a second glance. When viewed with the human eye, the giant asteroid Vesta, which was the object of scrutiny by the Dawn spacecraft from 2011 to 2012, is quite unspectacular color-wise. Vesta looks grayish, pitted by a variety of large and small craters.

But scientists at the Max Planck Institute for Solar System Research in Katlenburg-Lindau, Germany, have re-analyzed the images of this giant asteroid obtained by Dawn's framing camera.

They assigned colors to different wavelengths of light and, in the process, revealed in unprecedented detail not only geological structures that are invisible to the naked eye, but also landscapes of incomparable beauty.

Researchers at Max Planck can now see structures such as melts from impacts, craters buried by quakes and foreign material brought by space rocks, visible with a resolution of 200 feet (60 meters) per pixel.

"The key to these images is the seven color filters of the camera system on board the spacecraft," said Andreas Nathues, the framing camera team lead at Max Planck."

"Since different minerals reflect light of different wavelengths to different degrees, the filters help reveal compositional differences that remain hidden without them. In addition, scientists calibrated the data so that the finest variations in brightness can be seen.

This coloured composite image from NASA's Dawn mission shows the crater Antonia, which lies in the enormous Rheasilvia basin in the southern hemisphere of the giant asteroid Vesta. 

The area lies around 58 degrees south latitude. 

Antonia has a diameter of 11 miles (17 kilometers). 

Credit: NASA/JPL-Caltech/UCLAMPS/DLR/IDA

In the new colorized images, different colors indicate different materials on the surface of Vesta. They reveal impressive formations and a wide range of geological diversity, said Nathues. But above all, the color-coded images are impressive because of their beauty.

"No artist could paint something like that. Only nature can do this," said Martin Hoffman, a member of the framing camera team also at Max Planck.

Pictures of the crater Aelia, the crater Antonia and an area near the crater Sextilia show some of Vesta's most impressive sites.

This colorful image from NASA's Dawn mission shows material northwest of the crater Sextilia on the giant asteroid Vesta. 

Sextilia, located around 30 degrees south latitude, is at the bottom right of this image. 

Credit: NASA/JPL-Caltech/UCLAMPS/DLR/IDA

Dawn visited Vesta from July 2011 to September 2012. The spacecraft is currently on its way to its second destination, the dwarf planet Ceres.

Ceres is the largest object in the main asteroid belt between Mars and Jupiter.

Tuesday, August 7, 2012

Guide to NASA MARS Rover Curiosity's Cameras - NavCams

Curiosity also has two pairs of Navigation cameras (Navcams) mounted up high on its mast.

Providing similar image quality as the Hazcams, these cameras will be used to help maneuver the rover to interesting locations.

With a fixed-aperture f/12 focus, the Navcams will capture 45-degree square images.

Teledyne DALSA is proud to contribute to the mission's success.

The image sensors for the Curiosity's Navcams and Hazcams were built in our Bromont, Quebec, semiconductor foundry, as were those on the previous Spirit and Opportunity rovers.

The hazard avoidance cameras are installed on each corner of the rover and the 3D stereoscopic navigation cameras are part of the rover's camera mast.

Guide to NASA MARS Rover Curiosity's Cameras - Haz Cam

Curiosity's hazard avoidance and navigation cameras contain Teledyne DALSA-built CCDs.

The first images from Curiosity came via the machine’s Hazard-Avoidance cameras or Hazcams.

These cameras are responsible for making sure Curiosity doesn’t run into any bad obstacles, and can take black-and-white 1-megapixel images of the area underneath and near the rover.

There are eight Hazcams arranged in pairs on the probe’s front and back, because it can just as easily drive backwards as forwards.

Each camera has a wide-field, fish-eye lens that provides a 124-degree view of the surrounding terrain.

The Hazcams were sheltered behind transparent protective covers immediately after landing, in anticipation of the dust that was kicked up during touchdown, which is why those initial pictures were so splotchy.

Those dust covers will be shot off with a small pyrotechnic device to get clearer images. When the rover gets moving, the front Hazcam pairs will take 3D images of possible targets to help scientists plan the motion of Curiosity’s sample-collecting arm.

Guide to NASA MARS Rover Curiosity's Cameras - MAHLI

For inspecting Martian rocks and soil up close, Curiosity will use its Mars Hand Lens Imager (MAHLI).

Sitting on the end of the rover’s robotic arm, MAHLI’s 2-megapixel color camera can focus on an object as close as three-quarters of an inch away.

It will act as a microscope, resolving material down to 15 microns, roughly half the diameter of a human hair.

MAHLI will be able to work night and day using four white light LEDs and two ultraviolet LEDs.

Images from the camera will be calibrated with a smartphone-sized plaque affixed to the side of the rover that contains colour chips, a stair-step pattern for depth, and a 1909 U.S. penny.

The penny was chosen as a nod to geologists’ tradition of placing a coin for size reference in close-up photographs of rocks.

Guide to NASA MARS Rover Curiosity's Cameras - MastCam

On the ground, the rover’s main workhorse cameras are the impressive MastCams.

Sitting 7 feet above the surface, these 2-megapixel cameras will provide color images and video of the surroundings.

Pictures taken with the MastCams will give you a feeling of what it’s like to stand on Mars, but with superhuman eyesight.

Different filters can be rotated in front of the MastCams, providing images in visible and near-infrared wavelengths.

The two nearly identical MastCams will combine to take 3-D stereo images. They can focus on objects as close as about 7 feet from the rover and see details down to roughly a few hundred microns.

They will see in “true color,” or approximately what your eyes would see if you were there with Curiosity.

Natural lighting on Mars tends to be slightly redder than on Earth because of the high amount of dust in the air.

So the rover will be taking images with a slight adjustment that gives them a warm, orangey glow similar to sunlight at sunset on Earth to capture this effect. The MastCams will also be taking images without this feature.

One of the biggest requests that scientists had for Curiosity was the addition of a telephoto lens.

The previous rovers, Spirit and Opportunity, could see details about as well as a person would on Mars.

But MastCam’s right camera has a 100-mm focal-length lens that provides three times the resolution of previous Mars rover cameras.

It can distinguish between a football and a basketball from seven football fields away.

While the left camera, with its 34-mm lens, can’t see as well, it will provide much wider views – about 15 degrees versus the right camera’s five degree field-of-view.

The MastCams can take full-color 360-degree panoramic images by stitching together 150 individual photos taken in a slowly rotating circle.

Finally, the cameras can also take 720p high-definition video at a rate of about 10 frames per second.

Guide to NASA Mars Curiosity Rover's Cameras - MARDI

Curiosity is packed with no fewer than 17 cameras to shoot high-quality photos and videos in black-and-white, color, and 3-D stereo of the Martian landscape.

While scientists are no doubt quite eager for the information that these images will contain, most of us will be excited to live vicariously through the rover and experience some breathtaking views on Mars.

First up is the Mars Descent Imager (MARDI), which recently beamed back an amazing video of the rover’s nail-biting descent.

MARDI turned on during the final few minutes of the “Seven Minutes of Terror” and recorded a full-color high-definition movie as the ground rushed up to meet the rover.

With this film (and the coming high-def version), you get to experience what the wild ride down to the surface looked like.

MARDI is a 2-megapixel wide-angle camera mounted toward the front on the port side of Curiosity. The camera came to life just after the spacecraft’s heat shield jettisoned, taking images of a roughly 2 by 2.5-mile square, with a resolution of about 8 feet per pixel.

The final fully-in-focus images came when the rover was about 15 feet off the ground. In addition to a thrilling film, MARDI will provide scientists the opportunity to know exactly where Curiosity landed and learn a bit about the surrounding area.